HP Printer Customer Service Phone Number 1-844-762-3952

HP Customer Care 1-844-762-3952
HP Customer Care 1-844-762-3952 5/17/18 1:15 PM

HP printer is known for its various features and functionalities which provides an edge over other available printers in the market. In case you ever face some error in it and you need to change the settings in its default mode then you will be required to reset the settings of HP Printer. The printers contain non-volatile random access memory in short NVRAM and its main job is to keep all the information in the memory even it is off. It is possible to reset the printer as well as NVRAM if you have to erase the memory of it. Here you get the complete solution with a process which depends on the different model of printer which you possess. If you face any error while following the process then no need to worry as there is another way to sort it out through HP Technical Support Number where you will get the assistance from skilled technicians without any hassle
Solution to reset the HP Printer which needs to follow in a proper way-
• If the printer is on then you will be required to hold down the green “GO” button and it works only on the 1100 and 1200 series of printers. You have to turn off the power before resetting the printer’s settings for other models. If you want to reset the NVRAM, then just hold down on the “GO” button for just 20 seconds while turning on the printer again.
• After the previous step, you have to just turn on the printer by holding down the ‘Go’ button and just wait for the ‘Attention’ light to appear and after that just release it back and observe the device light to cycle. Now you have to hold the button up in the blink of ‘Ready’ and ‘Go’ light on to reset the NVRAM.
• Now it’s time to hold down the red ‘Cancel’ button off and turn back it on. After that, you have to release the ‘Cancel’ button once the LED lights blink. This will reset both printer and NVRAM at the same time.
• After that, you have to just hold on the ‘Release’ button which is at the back of the printer and the hold down it for less than 20 seconds to reset the printer and to reset NVRAM hold it for a longer period.
As it can be seen in above mention instructions that by following the same you will be able to restore the settings of the printer in an easy way. There is a minor possibility that you can face some error while following the steps and if it happens then no need to worry as you have another way to sort it out through HP printer Customer Support number where you will get the help from certified experts within a short span of time and a perfect response.
Source: - https://www.technicalsupporttollfree.com/how-to-reset-an-hp-printer/

Rate this Topic:
  • 1
  • 2
  • 3
  • 4
  • 5


  • No one has made a comment yet on this community topic.

Write A Comment

Please register in sprasia to post comments.